Our gyro screen has greater capacity and accurate screening power. It provides high capacity per meter square of screening area and the oversized material is discharged with relatively much less percentage of fineness than other screening machines. The vibrating gyro screen we supply in the market is has longer screen life as the screening membrane is held in uniform tension on the specially designed mesh frames. Additionally we are one of the most reputed multi desk gyro screen manufacturers as well as suppliers from India.
The top weight on the motor shaft rotates in a plane close to the center of the mass of assembly. Rotation of the top eccentric weight creates vibration in the horizontal plane which causes material to move across the screen cloth to periphery. Increasing the top eccentric mass increases the horizontal throw causing over size material to discharge at a faster rate.
The bottom eccentric weight rotates below the center of vibrating mass creating tilt on the screen giving vibration in vertical & tangential planes. Increasing the vertical component of motion promotes turn over of material on the screen surface helping maximum quantity of undersize material to pass through the screen. The effective vertical motion helps in minimizing blinding of screen by near size particles.
The tangential component of motion is controlled by the angle of lead given to bottom weights with relation to top weight.
Variation in lead angle controls the spiral pattern of material travel over the screen cloth. Speed & Flow pattern of material travel over the screen cloth can be set by the operator for maximum through put & screening efficiency for any screenable Product Wet or Dry Coarse or Fine Heavy or Light Hot or Cold. Typical material travel patterns generated at various lead angles are shown below:
The material is fed on to the center of top screen. The undersize material passes rapidly through the screen during its travel to the periphery. The over size material gets continuously discharged through a tangential outlet. Gyroscreens are equipped to handle upto five different screens one on the top of the other with feed trays in between to give six precise sized fraction in single screening operation.
Special design with seven screens is also available for grading.
Gyroscreen Features
Greater Capacity More Accurate screening. Gyroscreen gives greater capacity per meter square of screening area & oversize material is discharged with relatively much less percentage of finesthanotherscreeningmachines.
Minimum Blinding
Gyroscreen multi plane action limits screen blinding to an acceptable minimum. However for material having inherent blinding characteristics, Gyroscreen offers anti-blinding accessories to eliminate blinding.
Longer Screen Life
Screen cloth is held inuniformtension on specially designed mesh frames. The drum tight screening surface vibrates rigidly without flexing of wires, greatly reducing screen wear and increasing screen life.
No Transmitted Vibration
No special flooring or foundation required. The gyroscreen may placed wherever it is needed, likeon top of bins, on wooden or upper floors, light structures.
Less Space Reqired
For equivalent capacity, Gyroscreen requires less space than other screening systems. Compact units can fit into existing production lines.
Your Price Advantage
Our company's modern conception results in lower production cost which we pass on to you through cost effective prices. Test our efficiency right now, no matter whether you are already using vibrating screens or are intending to introduce screening systems. An enquiry to us pays immediately.